330007 Lashing Winch 4500Kg (10,000lb) Macs 4500Kg (10,000 lb.) capacity lashing winch can be used to tension any 2" wide webbing assembly. Easily tensioned using a 1-1/8" socket or 1 1/8" Spanner. And ideal for applications where ratchet handle clearance is a problem or for use where the front of the vehicle is at the very front of the trailer. To maximise capacity and fasten securely, the lashing winch should be fastened with HT bolts and or welded to the deck chassis..
Several tie down options are available for use with the lashing winch:
wheel nets are custom made by Macs in Idaho and brought down on an indent basis with consolidated shipments. They are made specifically for the height and width of a tyre
Over wheel straps -where the tyre height is greater than 600mm eg 785mm or 31" hot rod tyre, we recommend the 3.0M running end 191410 be used in conjunction with lashing D rings 330002
Video 1 Video 2 Shipping dimensions: 110mm (H) X 100mm (L) x 140mm (W) = 0.00154m³ 2.0Kg
Several tie down options are available for use with the lashing winch:
- wheel nets are custom made by Macs in Idaho and brought down on an indent basis with consolidated shipments. They are made specifically for the height and width of a tyre
- Over wheel straps -where the tyre height is 600mm (24") or less then the 2.4M running end 191408 be used in conjunction with lashing D rings 330002
- Over wheel straps -where the tyre height is greater than 600mm eg 785mm or 31" hot rod tyre, we recommend the 3.0M running end 191410 be used in conjunction with lashing D rings 330002
Video 1 Video 2Shipping dimensions: 110mm (H) X 100mm (L) x 140mm (W) = 0.00154m³ 2.0Kg