511390 Macs USA Drag Pack Black 17 Pce-Indent Only

511390 Macs USA Drag Pack Black 17Pce-Indent Only

Mac's Full Drag Pack is the ideal solution for getting your dragster from the garage to the track and back again safely. Whether you need anchor points or your trailer already has proper hardware installed, we have an option for you!

With two size options for the Rear Spreader Bar Nets, we have a Drag Pack that fits both a Classic Dragster as well as a Nostalgia Dragster.

• Dragster Nets - includes 12" spreader bars; fits rear tire sizes ranging from 31" to 35" tall.
• Nostalgia Nets - includes 9" spreader bars designed for narrower tires; fits rear tires between 29" to 33" tall.

Rear Spreader Bar Nets

Using a single strap on a rear oversized, soft dragster tire can damage the tire in transit. The Mac's Rear Spreader Bar Nets are built with two (2) billet aluminum spreader bars that disperse the load and eliminate a center groove left on the tire by a standard single strap. The Rear Spreader Bar Nets feature a Twisted Snap Hook on the fixed end and a Direct Hook Ratchet for tensioning.

Front Drag Nets

We built our nets from 1 inch webbing and they fit perfectly over the front tires to ensure the front of the vehicle stays stationary.
 

Front Drag Nets with Single Studs

The Front Drag Nets feature a VersaTie Single Stud Tie-Down Ring sewn directly to the ends of the net, making securing it with the VersaTie anchor plates a snap. The ring freely swivels to prevent binding and ensures good load alignment. The Single Stud Tie-Down Ring is comprised of a cadmium plated alloy steel stud, an anodized aluminum body and a stainless steel ring, ensuring years of trouble-free use.
 

Recessed D Rings 330002

An industry standard, this 6,000 lb. capacity D-Ring lifts from the recess for easy use. Zinc plated for corrosion resistance.

Recess hole size: 3 1/2"; Depth: 7/8", Bolt hole size: 3/8"

Coordinating backing plates are laser cut from 1/4"-thick steel. Together these two pieces provide a rock-solid anchor point for the rear spreader 
 

VersaTie Anchor Plates

Each anchor plate assembly is designed to a 3,000lb Minimum Breaking Strength (MBS) in vertical pull and a 2,000lb MBS at 45° (Recommended working load is 1/3 MBS). The tie-down ring freely swivels to prevent binding and ensure good load alignment.The tie-down ring in this application will be attached to the Front Drag Net and when removed leaves only the smooth contoured black anodized.

17 Piece Drag Pack includes: 

• Two (2) Rear Spreader Bar Nets with Twisted Snap Hooks
• Four (4) Recessed D-rings
• Four (4) D ring Backing Plates
• Two (2) Front Drag Nets with Single Stud Rings
• Four (4) VersaTie Single Stud Anchor Plate Assemblies
• One (1) Blue Macs USA Duffle Bag