PH: 0800362435 

RimPro Tec Kit - 4 Black tracks with your choice of 12 Coloured Inner Beads--NZ Made
larger imageMove mouse over the image to magnify

RimPro Tec Kit - 4 Black tracks with your choice of 12 Coloured Inner Beads--NZ Made

NZ $149.95

RimPro Tec Kit - 4 black tracks with your choice of 12 Coloured Inner Beads--NZ Made


RimPro-Tec reduces the risk of damage to caused by contact with the kerb when parking and manoeuvring and designed to fit most wheels 14" to 22"

RimPro-Tec is a 2 part system with a:
  1. track that is easily applied to the outside of the rim using a 3M 2 sided adhesive tape. The tape is simply peeled from the back of the track, exposing the adhesive track which is then affixed to the rim.The track requires a 6mm (1/4") flat surface to adhere to and may not be suitable for all rims in the market
  2. inner bead that is simply a press fit into the track and you choice from a range of 12 inner beads colours. 
The system can be installed within 30-40 minutes to all 4 wheels but preparation is the key so before application:
  • Address any alignment or balancing that may be required prior to the application of RimPro Tec
  • Ensure all contaminants have been removed from wheels- especially silicone and brake dust
  • NB: Some new vehicles have a waterproof coating applied to their wheel rims in the pre- delivery process. This coating must be removed in the same way as other contaminants: wash with warm soapy water, dry thoroughly and finally wipe clean with the alcohol impregnated wipes included in the pack.
This RimPro-Tec kit comes packaged complete with a full set of:
  • 4 x Black tracks + and your choice of inner bead from a range of 12 inner beads colours-after the "Checkout" stage , add your colour choice in the "Add a message" section from these options:
1. Black 
2.Red-:is bright fire engine red similar to Corvette Torch Red. (It’s not a good match with dark wine red vehicles. We recommend silver on black or black on silver insert/track combinations instead.) 
5.Light blue
6. Dark blue 
10.Light Green 
11.Dark Green 

  • Fitting tool to press the bead into the track
  • Alcohol impregnated wipes
  • Installation instructions
Installation video link:
No need to replace RimPro Tec when changing your tyre--video link here:

Shipping dimensions: H 0.060mm x W 0.365mm x L 0.0365mm= 0.008m³ /1.2Kg

You might also be interested in ...





 Large NZHRA logo 1