PH: 0800362435 

20127 Eastwood Solid Rivet Kit
larger imageMove mouse over the image to magnify
20127

20127 Eastwood Solid Rivet Kit

NZ $455.00
Qty.
20127 Eastwood Solid Rivet Kit
Logo-Horizontal
Used to structurally join metals panels in place of traditional threaded hardware. AN470 rivets are 10010 series aluminum and once driven will not loosens like typical threaded fasteners with vibration or heat.

Solid rivet kit designed to install AN470 series aluminum rivets in steel, aluminum . Used to structurally join panels for underhood, door skins, interiors, etc. Kit includes all components required to drive AN470 ( round head) rivets in both 1/8 and 3/16 inch diameter. These are the same rivets used on aircraft and high performance race vehicles. Complete instructions included with kit. Kit includes professional pneumatic rivet gun, 1/8 inch and 3/16 inch rivet sets for round head rivets, universal dolly (bucking bar), 1/8 inch and 3/16 inch Cleco kit and 1/4lb of 1/8 inch and 3/16 inch rivets in 3/16

 

Contents

19074 1/8" Cleco panel holding kit  + 10 x 3/16" clecos

20139 Rivet dolly (bucking bar) - Universal bucking bar 3 3/4 inch long, 2 inch wide, 1 inch high. Weighs 1.5 lbs . Made of cast steel

20140 1/8in dia x 3/16in long rivet- 1/8 inch x 3/16 inch 470 style aluminum rivet. Made for 1000 series aluminum for aluminum or steel panels. MS20470 4 3 or AN470 4 3 industry part numbers. Quantity: 1/4Lb = approx 430

20141 3/16in dia x 5/16in long rivet- 3/16 inch x 5/16 inch 470 style aluminum rivet. Made for 1000 series aluminum for aluminum or steel panels. MS20470 4 3 or AN470 4 3 industry part numbers. Quantity: 1/4Lb = approx 125

20142 Rivet set for 1/8in rivet- 3.5 inch overall length with 1/8 inch head for standard AN470 or MS20470 rivets. Shank style .401

20143 Rivet set for 3/16in rivet- 3.5 inch overall length with 3/16 inch head for standard AN470 or MS20470 rivets. Shank style .401

20144 Pneumatic Rivet Tool -4500 blows per minute rivet gun with 1/4 inch air inlet and 2.8cfm requirement at 90psi. Variable speed trigger accepts standard .401 shank tools.

  Video image
 

Click here for product instructions

 

You might also be interested in ...

FOLLOW US

 

CONTACT

MEMBERS

Large NZHRA logo 1
   

SECURE PAYMENTS