20565 Eastwood TIG200 AC/DC Welder
larger imageMove mouse over the image to magnify
20565

20565 Eastwood TIG200 AC/DC Welder

NZ $1,890.00
incl GST
Qty.

Eastwood TIG200 AC/DC Welder

Logo-Horizontal

Eastwood TIG 200 Welder...industrial TIG features at a DIY price!

Now with Stick Welding Feature!

  • Operates on 220vAC50/60Hz
  • 1/4"-thick welding capacity 
  • High-frequency start for precise arc control
  • Square-wave inverter for accurate aluminum welding
  • "WP-17"-type torch accepts common cups and collets, up to 1/8" electrodes
  • TIG Welding AC Duty Cycle (%)  220VAC 60% at 190 amps)
  • Backed by Eastwood's no-hassle return policy and 3-year warranty.

The specially engineered 200-amp Eastwood TIG Welder offers affordable, professional-quality TIG welding on aluminum, stainless or steel (sheet, tube or bar stock), and precise welding of thinner-gauge materials up to 1/4" thick.

Click a video link here
Video image


Easily transported on the 11616 Eastwood Multi-Unit Welding Cart - TIG Plasma


Specifications

Input Voltage: Single-Phase   220vAC (±15%) @ 50-60Hz
Output Amperage: 10-200 amps AC/DC
Maximum Output No-Load Voltage: 56V DC
TIG Welding AC Duty Cycle (%): ,220VAC 60% at 190 amps)
STICK Welding Duty Cycle (%): 220VAC 60% at 185 amps)
Post Gas Flow: 2-8 sec.
Pre Gas Flow: 0.1-1.0 sec.
Remote Foot Pedal And Control: Yes
Torch: Standard WP-17
Torch Control: Finger on/off control/Variable foot pedal
Overall Dimensions:19.1” (486 mm) x 9.8” (248 mm) x 20.0” (508 mm)
Approximate Weight:   20.4kg)

Duty Cycle

The Rated Duty Cycle refers to the amount of welding that can be done within an amount of time. The Eastwood TIG 200 has a duty cycle of 60% at 190 Amps. It is easiest to look at your welding time in blocks of 10 Minutes and the Duty Cycle being a percentage of that 10 Minutes. If welding at 190 Amps with a 60% Duty Cycle, within a 10 Minute block of time you can weld for 6 Minutes with 4 Minutes of cooling for the welder. To increase the Duty Cycle you can turn down the Amperage Output control. Going above 190 Amps will yield a lower duty cycle.

Contents

(1) TIG 200 AC/DC Welder with NZ/AU 15 amp single phase plug
(1) Shielding Gas Regulator
(1) Shielding Gas Hose
(1) Ground Cable with Clamp (10’)
(1) TIG Torch (17 Series) which accepts industry standard cups, collets and collet bodies (14’)
(1) Foot Pedal for Amperage Control
(1) Instruction Manual
(1) Hand Held Shield
(1) Hammer/Brush
(1) #7 Gas Nozzle (7/16”)
(1) #6 Gas Nozzle (3/8”)
(1) #5 Gas Nozzle (5/16”) (Installed)
(1) Long Back Cap
(1) Short Back Cap (Installed)
(1) 3/32” Collet Body (Installed)
(1) 3/32” Collet (Installed)
(1) 2mm Collet
(1) 1/16” Collet
(1) 3/32” Red Thoriated Tungsten
(1) 3/32” Green Pure Tungsten

You might also be interested in ...

FOLLOW US

 

CONTACT

MEMBERS

Large NZHRA logo 1
   

SECURE PAYMENTS